Clamp Selection

Model Selection

Capacity of Clamp:2-25(tons)
  • Empty:Standard type
  • S: Slide moveable type
  • N: With sensor type/DC10~30V (NPN, 3-Wire)
  • V: Heat-resistant type
  • C: Pneumatic cylinder movable type
  • VR: Heat-resistant with cover type
  • B: Fixed type
INSTRUCTION OF SPECIFICATION

Unit:mm

MODEL
Capacity of Clamp/*tons
Total Stroke (X)/mm
Stroke of Clamp (Y)/mm
Preserved Stroke (Z)/mm
Total Volume/cc
CB-2 CB-4 CB-6 CB-10 CB-16 CB-25 CB-50
2 4 6 10 16 25 50
8 8 8 8 8 8 10
3 3 3 3 3 3 4
5 5 5 5 5 5 6
7.5 13 21 38 55 98 220

*Hydraulic pressure: 250kgf/cm²

MODEL CB

型式選定
型式選定
型式選定
OUTLINE DIMENSIONS

Unit:mm

MODLE
CB-2
CB-4
CB-6
CB-10
CB-16
CB-25
CB-50
L K J min. E F G min.
110 90 20 73 68 32 10
134 110 24 77 79 40 12
159 130 29 92 96 46 14
189 159 30 114 117 54 16
230 200 30 126 129 58 20
265 235 30 148 156 70 23
320 290 30 180 246 110 34
  • The size of clampsA B Cand D are made based on the size of T-slot.
VERTICAL LOADING
型式選定
  • Platen with T-slot
  • Optional for position checking sensor

MODEL CB-N

型式選定
型式選定
OUTLINE DIMENSIONS

Unit:mm

MODEL
CB-2N
CB-4N
CB-6N
CB-10N
CB-16N
CB-25N
CB-50N
A B min. E G J K L
56 34 73 32 20 90 110
61.5 39.5 77 40 24 110 134
70 48 92 46 29 130 159
80 58.5 114 54 30 159 189
86 64.5 126 58 30 200 230
99 78 148 70 30 235 265
145 123 180 110 30 290 320
VERTICAL LOADING
  • Platen with T-slot and manual clamp with sensor.

MODEL CB-C

型式選定
型式選定
OUTLINE DIMENSIONS

Unit:mm

MODEL
CB-2C
CB-4C
CB-6C
CB-10C
CB-16C
CB-25C
CB-50C
A B C D E F G K L Rc Tapping(T)
56 68 28 41 20 57.5 66 90 131 1/8 M6x12D
61.5 73.5 28 46.5 20 57.5 71.5 110 131 1/8 M6x12D
70 86 34 55 24 62.5 82 130 135 1/8 M6x12D
80 104 40 66 30 48.5 101 159 129 1/8 M8x16D
86 119.5 50 73.5 36 50 117 200 141 1/8 M10x20D
99 133 50 87 36 50 130 235 141 1/8 M10x20D
145 263 100 138 110 62 220 290 192 3/8 M16x32D
VERTICAL LOADING
  • Platen with T-slot and clamps moved automatically by pneumatic cylinder.
  • Another selection of clamping direction: left-right.

MODEL CB-S

OUTLINE DIMENSIONS

Unit:mm

MODEL
CB-2S
CB-4S
CB-6S
CB-10S
CB-16S
CB-25S
A B C D min.E F G W max. N Tapping (T)
12 20 80 98 90 76 30 124 25 M10X20D
12 25 100 109 93 87 30 135 30 M12X24D
15 30 120 126 109 104 30 152 35 M12X24D
15 35 150 148 131 124 36 174 40 M14X28D
20 40 200 166 142 138 44 200 50 M18X36D
20 50 235 200 163 168 48 240 60 M22X45D
VERTICAL LOADING
  • For Platen without T-slots and the sizes of mold are variable.

Suggested dimension of T-slot | Additional T-slots plated

Unit: mm

MODEL
CB-2
CB-4
CB-6
CB-10
CB-16
CB-25
CB-50
T a b c d
32 18 32 14 18±0.2
40 22 37 16 24±0.2
40 22 37 16 24±0.2
44 28 48 18 26±0.2
52 28 48 22 30±0.2
61 36 56 25 36±0.2
84 48 80 36 48±0.2
型式選定
  • T: The thickness of additional T-slot platen (min.)

MODEL CB-B

型式選定
型式選定
型式選定
OUTLINE DIMENSIONS

Unit:mm

MODEL
CB-2B
CB-4B
CB-6B
CB-10B
CB-16B
CB-25B
A B D F G min. E W Tapping (T)
12 35 90 20 84 90 106 M10X20D
12 40 110 25 95 93 117 M12X24D
15 45 130 30 115 109 140 M12X24D
15 55 159 30 135 131 160 M14X28D
20 65 200 30 158 142 192 M16X32D
20 80 235 30 184 163 218 M18X36D
VERTICAL LOADING
型式選定
  • For Platen without T-slot and the sizes of mold is unified.
  • Suggest CB-S for movable platen.

MODEL CG

  • CG Clamp is charactered in mechanical locking system. The holder of clamp can be shrunk into the clamp when unclamping. It can avoid interference between the holder and mold template.
  • It is only applied on Mold Changer System.

Model Selection

型式選定
The capacity of clamp (4~50 ton) Thickness of template
( H±0.5mm )
The direction of piping and wiring connection:
L: on the left side (as below drawing)
R: on the right side
U: on the upper side
Sensor voltage:
3: DC10~30V (NPN, 3-Wire)
4: DC10~30V (PNP, 3-Wire)
INSTRUCTION OF SPECIFICATION

Unit:mm

MODEL
Clamping force /*tons
Retaining force /**tons
Preserved stroke (Z) /mm
Working temperature /℃
CG-4B CG-6B CG-10B CG-16B CG-25B CG-50B
4 6 10 16 25 50
0.8 1.2 2 3.2 5 10
1.5 2
Max 70℃
* Hydraulic Pressure: 140kg/cm²
** No hydraulic pressure
型式選定
型式選定

CG-4B~10B

型式選定
型式選定

CG-16B~50B


Unit:mm

MODEL
CG-4B
CG-6B
CG-10B
CG-16B
CG-25B
CG-50B
A B C D E F G I J K L M N O P Q Rc H±0.5 T
186 123 75 50 30 113 42 17 2 27 90 62 35 14 - 115 1/4 25 M16
202 140 85 48 36 126 48 19 3 33 110 76 45 17 - 124 1/4 30 M20
215 150 98 53 42 138 56 23 3 36 135 95 50 20 - 131 1/4 30 M24
258 190 128 74 53 175 82 28 5 33 138 104 60 17 40 156 1/4 30 M20
302 240 159 100 64 212 100 33 5 40 170 130 75 20 50 188 1/4 40 M24
365 290 195 140 88 268 125 35 5 50 215 162 100 27 60 227 3/8 50 M33

Check Valve Clamp

FEATURE
  • Better safety design clamp.
  • Clamp with Build-in check valve, it can keeps the pressure itself.
  • The clamp will not release, even if the hydraulic tube is damaged.
  • Separate clamp body design, easy for maintain and exchange.
  • Waterproof design for cylinder and piston.

Model Selection

Capacity of Clamp:2-25(tons)
  • Empty:Standard type
  • N: With sensor type/DC10~30V (NPN, 3-Wire)
  • C: Pneumatic cylinder movable type
INSTRUCTION OF SPECIFICATION

Unit:mm

MODEL
Capacity of Clamp/*tons
Total Stroke (X)/mm
Stroke of Clamp (Y)/mm
Preserved Stroke (Z)/mm
Total Volume of cylinder/cc
The tolerance of the template thickness (H) /mm
CBK-2 CBK-4 CBK-6 CBK-10 CBK-16 CBK-25
2 4 6 10 16 25
8 8 8 8 8 8
3 3 3 3 3 3
5 5 5 5 5 5
8 13 22 38 55 99
±2 ±2 ±2 ±2 ±2 ±2

*Hydraulic pressure: 24.5MPa (250kg/cm²)(3550psi)

CIRCUIT CONTROL SYSTEM

MODEL CBK

OUTLINE DIMENSIONS

Unit:mm

MODEL
CBK-2
CBK-4
CBK-6
CBK-10
CBK-16
CBK-25
min.C min.E F G I J K L max. N Q
10 73 68 32 9 20 106 126 15 46
12 85 79 40 9 24 124 148 20 61
14 100 96 46 9 29 149 178 25 80
16 119 117 54 8 30 171 201 30 87
20 133 129 58 8 30 202 232 35 108
23 150 156 70 8 30 235 265 40 128

MODEL CBK-N

OUTLINE DIMENSIONS

Unit:mm

MODEL
CBK-2N
CBK-4N
CBK-6N
CBK-10N
CBK-16N
CBK-25N
A B G J K L
52 56 32 20 106 126
57.5 39.5 40 24 124 148
70 48 46 29 149 178
80 58.5 54 30 171 201
85.5 64.5 58 30 202 232
99 78 70 30 235 265

MODEL CBK-C

OUTLINE DIMENSIONS

Unit:mm

MODEL
CBK-4C
CBK-6C
CBK-10C
CBK-16C
CBK-25C
A B C D E F G K L Rc Tapping (T)
58 73.5 29 46.5 20 57.5 73.5 124 131 1/8 M6 X 12D
70 86 34.5 55 24 61.5 82 149 135.5 1/8 M6 X 12D
80 104 41.5 66 30 49 101 171 130 1/8 M8 X 16D
86 119.5 52 73.5 36 50 112.5 202 141 1/8 M10 X 20D
99 139 63.5 88 40 65 138.5 235 168 1/4 M10 X 20D
Copyright © Sandsun Precision Machinery Co., Ltd.   PRM Taiwan  , Design by Polaris